jfg

Hi Gavin. Where are you located? Do you have a price in mind?

Thanks for the info. Hope you resolve this soon.

Hi Leeshan. Did you confirm the polarity of the wires from the panels? Are the correct PV input mode selected? Did you use the app or a web browser on a laptop to configure the settings? I've noticed the app doesnt perfom as it should, using a laptop or PC might make a difference.

Hi Conrad. Please send the manual to me as well - I've got a friend struggling with his setup and the installer is MIA.

Hi Chelin. Do you have a manual? Does the manual provide details on the pin connections?

Nice! Glad to hear that..

Hi Theo. I found out the Luxpower PIN configuration changed recently, so likely the LAN cable supplied with the Dyness battery and marked for Luxpower is probably incorrect / outdated. The LAN cable should be a strait pin to pin configuration. I did the installation for my Skoonma - haven't been back to see if that will resolve the issue, but I believe it should. Please let me know if you've tried this and/if you found another solution.

Hi Guys. So I also have a communication fault between the Luxpower and Dyness (BX51100) battery. I changed the battery type to lead-acid with the associated voltage parameter settings. That seems to resolve the communication issue (or probably negate the need for communication). I used the app and the interver HMI to do the setup initially, however the inverter still didnt charge the battery. Only when I entered the settings on a laptop (https://af.luxpowertek.com/WManage/web/config/inverter) did it work. Below is a pin diagram I received from Luxpower tech support ([email protected] - they are very quick to respond). Unfortunately this is not the fualt in my case, so the communication fault remains an issue if anyone has any advise it will be appreciated...