April 2, 20197 yr How much should I budget for a DB board installation? (3KW inverter) Edited April 2, 20197 yr by Mistral
April 2, 20197 yr 20 minutes ago, Mistral said: How much should I budget for a DB board installation? (3KW inverter) R10k+ ... because when they open the board, there is going to be something wrong. I swear. Have THAT T-shirt now too. Earthing was a problem. Flip side, if all is fine, in-out-CoC in hand, between R2500 and R3500 - depending on the hourly rate. Edited April 2, 20197 yr by Guest
April 2, 20197 yr In my experience, I have always found a reason for wishing the big one I installed was even bigger. I think that is most peoples' opinion. So if it's a new DB, go big, and then add a bit more space.
April 2, 20197 yr At least twice as big as the size that you think that could contain everything you will need.
April 2, 20197 yr we always start with a 18 way as the price difference between 18 and 12 isnt that much considering the capacity to expand later.
April 3, 20197 yr 12 hours ago, Fazil said: we always start with a 18 way as the price difference between 18 and 12 isnt that much considering the capacity to expand later. This and add plenty of spare coduit pipes up to the ceiling ,
April 3, 20197 yr 18 hours ago, phil.g00 said: At least twice as big as the size that you think that could contain everything you will need agree. When I build my house 4 years ago I thought the 60 way (3 x 20) Samite board would be more than big enough. It is already to small☹️.
April 3, 20197 yr And 25mm conduit going up and out preferably. With a larger DB the conduconduits fill up quickly with all the cables
April 3, 20197 yr In addition to size the design (as I have learned the hard way) is also very important. To remove the frame of my Samite board is such a disaster that I have nightmares about it.
April 4, 20197 yr On 2019/04/03 at 10:41 AM, Mistral said: Any recommendations on design? depends on the loads but typically we use: 2x 20A for plugs 1x 10A for lights 1 40A mains breaker as a standard i run a dinrail mount 30A contactor in the db to switch to these priority loads for solar. that is just me Cost for all the above we supply pre-wired for R3500. Have supplied plenty already across Josie. Edited April 4, 20197 yr by Fazil
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.