July 16Jul 16 Hello friends. First, I’d like to congratulate you on this wonderful forum; you really help others, thanks for your work.I also want to apologize for my limited English; I am using Google Translate.Here is the issue: I added a US5000 to my rack (which consists of 3x US3000C + 1x US5000), connected via CAN BMS to a Victron Cerbo + Multiplus II 5kW. The problem is that when I added the new battery, the CAN BMS connection failed, and the batteries operated without the controller, I fear they may have experienced overvoltage.As a result, the older US5000 became inactive: the "Run" LED flashes every 4 seconds, while the red LED and SOC LEDs are off.The Cerbo recognizes it and displays its data (SOC 98%, SOH 97%, etc.), but it isn't transferring energy even though it is connected to the inverter. It is running firmware V2.0.When connected to BatteryView, I see this screen:The 32ºC temperature is normal for Spain at this time of year. The "Basic State" is stuck on IDLE.Accessing the console via pylon:and via pylon_debug:What do you think might be happening? Any suggestions? Should I replace blown fuses, or should I try a warranty claim (the battery is 18 months old)?Thanks in advance to everyone.
July 20Jul 20 Author Hello SolarDeity, thanks for replying. I need the country code to register your phone number on WhatsApp.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.