Jump to content

new2solar

Members
  • Posts

    11
  • Joined

  • Last visited

Everything posted by new2solar

  1. I only have 1 inverter and it is set to MASTER.
  2. Had the same issue recently and implemented these settings (Modbus SN changed to 00 changed it to 01). It is still working.
  3. Congrats on your setup. Did you get the Cloudlink to work on your Sunsynk 8kw and if so what configuration was used. Also are you able to get inverter and battery data or only battery data?
  4. Please provide information in terms of how one should set this up? Is it a normal network cable from RIOT MUL port to the RS485 port on the 8kw Sunsynk inverter? Should the setup be as follows: - Serial port on the RIOT to RS232 port on the battery - MUL port on the RIOT to RS485 port on the inverter (normal network cable or special cable?) - CAN port on the RIOT to CAN port on the inverter (normal network cable or special cable?)
  5. Will it work with a normal network cable from the CAN of the battery to the CAN of the inverter?
  6. Hi, Please assist. How does one connect the Cloudlink RIOT to a Sunsynk Inverter? Currently only getting battery information. The RIOT does not pick up the inverter. Tried by connecting the Hubble battery to the RIOT via the serial port (RS232) and from the RIOT CAN port to the Sunsynk inverter. Also tried from the CAN on the battery to the MUL port on the RIOT and from the CAN on the RIOT to the CAN on the Sunsynk.
  7. Hi, Please explain how this screen works? - System mode (Please suggest best possible settings) - Battery setup > Shutdown screen.
  8. Hi, Please advise on the Hubble Battery Settings on Sunsynk? Battery Type Screen - Battery capacity, charge amps, discharge amps? Battery Charge Screen - Amps, Float V, Absorption V, Equalization V? Or are this ignored and controlled by the BMS. How does one equalise the batteries or does this also happen automatically?
×
×
  • Create New...