Ridiq

I think that the problem is rather with the battery. I'm providing power from AC and PV and the battery stops taking charge at 88%.

Hi all. I have the same issue on my side. Initially the battery charged to 97% eish, but now only go to 88%. Luxpower 5kW SNA & Greenrich battery. Program 3, Protocol selection 2, one of the "older" LuxPower. (5kW SNA). Voltage goes up to 54.6V but battery would not take any more charge. Charge Amps also set to 20A. Has anyone gotten feedback from the suppliers yet?

@SolarNoob101 were you able to get the wi-fo setup working as mentioned by JPRoux?

Hi, yes it is, please contact me on 0826070167.

I still have 1 x X100-48 Hubble battery for sale. 95 Cycles. Added a X101 and they're not working 100% together, upgraded to 2 x X101's. Price = R19 500, collection in Centurion or couriers costs for buyers account. Buyer to arrange courier.

Hi MakoShark - if I may ask, which App are you using, cant seem to find it on mine.

Nah, not really... follow the link to the site https://powerforum-store.co.za/ and there's a different price...

@Buyeye LOL, bit heavy for a paperweight, but yeah, it's all its doing at the moment, sitting on the side and watch the 8kW working. Still have it.

Thanks, I noticed, still leaving it out there, someone might just need one at short notice...

Hi, I want to sell my 5kW SunSynk Inverter. Still good as new, had it installed for a week (November 2021) and then upgraded tot a 8kW. Sill in its box and working 100%. Price R17 500 R22 000 R20 000. This price include the Wi-Fi dongle. I live in Centurion. Regards Fanie 0826070167 [email protected]

Hi Gremlin and all Think this following link explain it clearly as well. https://solarpanelsvenue.com/mixing-solar-panels/

WOW, glad you got it sorted Rclegg. All the time the PV voltage that was too Low?

I would also drop the PV charging amps to 30A Recommend Charge/Discharge Current (A) 37 Max. Charge/Discharge Current (A) 74 Peak Charge/Discharge Current (A) 100A@15sec

Hi Rclegg Your back to Grid seems a bit low, and your back to discharge can be a bit lower. See below the settings that we use.

Dankie vir die reply Jaco -daar leer ek nog.

Hallo JannieM Yes, it seems you have too many panels for the Inverters as far as my knowledge also. I use 12 x 360W Canadians in two strings of 6 in series and then in parallel and that keeps it at 4320 that is also just onder the 4.5kW limitation of the Mark 2's. Problems sneeks in with your 3rd sting of panels. Lets hear from the experts.

@Coulomb thanks a lot for the reply. We replaced the 2 x units on site with two that were not used in parallel to see if the problem persists and if the problem is caused by some external issues. Connectors were in tightly. Inverters are the 450V models (Mark 2's), so lets hope for the best. When we installed the system in Jan 2020 had one or two issues with Error 80 but after a reset all came right and did not think much of it. Seems that is just getting more frequently though. Will keep you updated. Thanks again for the assistance.

@wolfandy thanks for the reply. Hope that @Coulomb would be able to advise. We are not sure if the Fault 80 is the cause of the shutdown. We did experience the Error 80 code when setting up the system initially but never again, except now after the shutdowns.

Good day all. Please assist. Have 2 x 5Kw Axpert Inverters connected in Parallel, 7 x 2.4kw Pylontech batterybank and 16 x 355W (2 strings) and ICC running on a Raspberry Pi3B. For no obvious reason the system now just shuts down at least once a week. Seems to happen when batteries are almost full. No sign of high load or anything that we can trace. After the "shutdown" the inverters disconnects from the Load and all power has to be re-cycled to get system powered on again. Fault 80 pops up afterwards. Could Fault 80 cause the system to shut down? System installed in Jan/Feb 2020 and had no other issues. Has anyone come across something like this and how can we fix it please.

**SOLD**

Hi there I have 3 x 2nd hand 305W 156 Series Polycrystalline solar panels for sale. Datasheet attached. They are about 5 years old. No damage that I am aware of, just want to upgrade to bigger panels. Going for a bargain price of R1000 per panel. Prefer if all 3 is bought together. Collection in Centurion. Feel free to contact me on 0826070167 or [email protected] Renesola-156poly-300w-305w-70179.pdf

SOLD.

Hi Clinton Yes, it is still available. Unfortunately not negotiable. Not sure about the firmware version, but did upgrade it to a custom one where you could scroll with the up down arrows on the left and right side of the display without rolling over to the other side of display. Never had any issues with the inveter.

I upgraded and want to sell my 4KW 5KVA Axpert RCT Inverter. Parallel board included. Price R7500. Buyer to collect or arrange for courier to pick up. I live in Centurion. All cables etc included. Welcome to contact me on 0826070167 or [email protected]