fourwp

What cell are in these new units?

Thanks Robbie I used the Tuya Local HACS integration. https://github.com/make-all/tuya-local I added the EMS heat pump as a device with the info supplied in the URL above.

Hi nk00li, thanks for adding the EMS heat pump to the Tuya Local HACS integration I am also using it to manage my EMS heat pump on Home Assistant I think the unit I have is not performing up to standard, it takes about 157 min on heat pump only mode to heat the water from 47c to 60c, according to its spec the heat pump has a heat capacity of about 3Kw. 3Kw should take about 60min to heat 200L from 47c to 60c according to various online water heating calculators I have checked. Can you possibly share with me how long it takes your Magneto (EMS) heat pump to heat water from 47c to 60c. Anyone else that have this unit can also comment on their experiences please.

Is there anyone on the forum that know Manie or knows what is going on?

I can also not get hold of them.

@Hendrik Grobler Hi Hendrik In this video Franco Diederiks mentions that this unit is a plug and play unit and that anyone with a bid of experience can install it. Can you confirm that the home owner with plumbing experience can install this unit and that the warranty will still be valid. Thanks.

I am just concerned if the firmware is not the same that it might not be able to work in parallel with my unit.

Is that a 4kW/5KVA inverter? I don't see the black heatsink at the top. The old 4KW/5KVA unit I had, were running 72.40 The 5KW/5KVA unit that I have now has FW 74.20 and I am looking for a second unit with the same firmware to parallel with it.

What firmware does this unit have and is it the 145VOC or 450Voc MPPT unit