apdcentral

LuxPower WIFI Dongle Settings after Factory Reset.pdf

Thank you, it took some time to get all in and work, la big earning experiences, it works for me, one control center for everything

Daytime view, solar forecast pretty dam close tuned in

Hi, I love it, I have 2x Luxtek 5kw inverters in parallel, connected to 4 batteries with 24 Solar Panels. Took me a while to get all the sensors connected over time and into HA

The Svolt works with the lux inverters, I have lux and 3 Svolt (106) batteries, work perfectly, diagram for single and multiples.

what switch do you require for this , to delay it

Hi Guys i am looking for Kodak OGS 6.5 Usb -RS485 Serial cable to do firmware upgrade

Can someone help me with the correct settings and dip switch setting to double check my inverter is connected correcty

Hi can someone help with this issue Kodak OGS 5.6Kwh inverter system works great , exception when Eskom return from load shed , the inverter restart 3 or 5 times till it stabilize and supply power

I need a bit f help, Kodak Off Gird OGS5.6 restart every time when Eskom return about 3 to 5 times, goes red restart do this about 3 or 5 times and then stabilize and run Kodak Off Gird OGS5.6 connected to 2x up5000 battery, if not for tis it works perfect , what can the issue be . Thank you

FYI I found this on the internet , the dess monitor app work with your same credentials , you setup your wifi with , user name and password http://www.dessmonitor.com/?#/entry

How do you upgrade the software , do you need to upgrade software ?

Kodak inverter connected to solar and 2x polytech 5000 battery When eskom goes if switch over nice . Problem when eskom comes back after load shed , the inverter switch , then after few min, show red circle and restart , does it 3 times , sometime 5 times, then only it run normal . What can be the reason for this incorrect settings ??