Void

Thank you Jumper.

Hi @jumper. You also have the SDC10-Box5 shoto? Can you maybe tell me what the resting voltage of your cells are? I managed to sort out the inability to charge to 100% Soc with 56.4, slight voltage difference on the packs. Had to charge each individually then parallel again. Just want to know now if 3.325 53.2 pack voltage is the correct resting voltage. I have seem on some photos they rest around 54

THANK you for this, been looking everywhere

Does anyone on here have a Shoto SDC10-Box5 connected to PC via Seplos Battery management software? I am looking for the parameter file for those batteries

Does anyone on here have a Shoto SDC10-Box5 connected to PC via Seplos Battery management software? I am looking for the parameter file for those batteries

Does anyone on here have a Shoto SDC10-Box5 connected to PC via Seplos Battery management software? I am looking for the parameter file for those batteries

I Need help with my Shoto SDC10-Box5 batteries (parallel connection with luxpower) RS485-B (Main battery) connects to RS485-A (Slave battery) Main connects to inverter VIA CAN port The batteries never charge to 100% SOC, Charge voltage has been changed between 56.4v bulk & 57.4 Bulk, I have played around with charging with time, battery SOC etc, and the closest I have got to 100% was on according to voltage setting (99%), will I damage the cells with this setting? I am happy with 99 / 98 % but not with the 80% / 91% i get from the other settings. Can someone who is able to charge above 97% please share some insight?