Gerry R

I have similar problem. Far right. Toaster icon is chopped off. Removing card height setting makes no difference. Not with standing that. Thanks for a fantastic card. Keep up the good work!

DIP Switches are correct. Value as per first image is for total. Same reading as in SA. Firmware in 1 and 2 are the same. 3 is different Looks like I need to contact Hubble for an update.

Hi all. Firstly thanks to S32 for the great work. I have 3 AM2s connected and am getting data from all 3 batteries as per the picture. But battery 1 is showing the "Capacity_Full" of the total batteries, as does the "Capacity_Remain","Current" and "Power" readings. I am using the "am2_to_mqtt.py" script as per the github post. Did I forget something? Is anybody else having similar result?

Apparently the 5kW Sunsynk is passively cooled. I found mine was inclined to run hot so I have "mounted" a AC panel fan on top of the inverter to suck air up through the heatsink. Using a sonoff and Home Assistant to control the fan. Switches on when to temperature goes above 60 degrees.

Does that mean that you have to load 1.46 first on both and then 2.05?

Batteries just stating to charge now.

With a bit of rewiring on the usb side they should work. The pin out on the RJ10 side is incorrect.

I haven't had any real issues yet. Just don't like to see a mismatch. Must be my ocd and technical background. Getting the updated bin file and firmware update software from Hubble was very easy. Just emailed them and requested the update. Only I have a problem in that the loader seems to be faulty. I keep getting a bin file error. The bms tools however connects perfectly and gives me the info as in the screen shots. I am just waiting for another lone laptop to try and get it in to the hubbles again.

Link: https://www.ufo-battery.com/download-tools Instructions: https://www.ufo-battery.com/step-1-software-download-and-installation I am using the RS232 cable from Solar Assistant.

Hi All, has anyone tried "pbms tools v2.5" on their Hubbles. This is what I get:

Must share the email I got from support.

MD5 checksum matches, so the bin file is not corrupted. Borrowed laptop had to be returned, but com port on my main PC matches yours, So will lug it out tomorrow and try again. Thanks for the info anyhow.

Thanks for the reply. Did all those things. Was using a borrowed laptop. Looks like I have to haul my desktop PC out to the garage and try again. Checksum will be a big help. This is the MD5 of the file I downloaded. 57639ba3640761b7762e9807a1464d0c

@system32 I got the firmware update utility and bin file (Same as yours) but i am getting a bin file error when I try to "Upgrade" I am using the usb to serial lead that works with Solar-Assistant. Setting appear to be set the same as in your screen shot. Am I missing something? Does the AM2 have to be set into firmware update mode or something?

I notice that the battery temperature on the Dashboard > Inverter page is the correct value. On the Dasboard > Inverter page the temperature has the correct value.