Skip to content
View in the app

A better way to browse. Learn more.
Power Forum - Renewable Energy Discussion

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Gerry R

Members

  • Joined

  • Last visited

View Profile Find content

Reputation Activity

  1. Like
    Gerry R got a reaction from slipx in Home Assistant Sunsynk Power Flow Card and Dashboard   
    I have similar problem. Far right. Toaster icon is chopped off. Removing card height setting makes no difference.
    Not with standing that.
    Thanks for a fantastic card. Keep up the good work!

  2. Like
    Gerry R got a reaction from Khin Mg Htwe in Hubble Lithium Battery AM-2 5.5kWh   
    Hi All, has anyone tried "pbms tools v2.5" on their Hubbles.
    This is what I get:
     


  3. Like
    Gerry R got a reaction from system32 in Hubble Lithium Battery AM-2 5.5kWh   
    Hi All, has anyone tried "pbms tools v2.5" on their Hubbles.
    This is what I get:
     


  4. Thanks
    Gerry R got a reaction from system32 in Hubble AM2 monitoring   
    DIP Switches are correct.
    Value as per first image is for total. Same reading as in SA.

    Firmware in 1 and 2 are the same. 3 is different

    Looks like I need to contact Hubble for an update.
  5. Like
    Gerry R got a reaction from HiTech in Hubble Lithium Battery AM-2 5.5kWh   
    Hi All, has anyone tried "pbms tools v2.5" on their Hubbles.
    This is what I get:
     


  6. Thanks
    Gerry R got a reaction from SeaSickMama in Hubble Lithium Battery AM-2 5.5kWh   
    Link: https://www.ufo-battery.com/download-tools
    Instructions: https://www.ufo-battery.com/step-1-software-download-and-installation
    I am using the RS232 cable from Solar Assistant.
  7. Like
    Gerry R got a reaction from system32 in Hubble Lithium Battery AM-2 5.5kWh   
    Thanks for the reply.
    Did all those things. Was using a borrowed laptop. Looks like I have to haul my desktop PC out to the garage and try again.
    Checksum will be a big help. This is the MD5 of the file I downloaded.
    57639ba3640761b7762e9807a1464d0c
  8. Like
    Gerry R got a reaction from Sc00bs in SunSynk - Inverter Monitoring   
    Top left hand 485 socket works for me.

  9. Like
    Gerry R got a reaction from werner.potgieter in SunSynk - Inverter Monitoring   
    Top left hand 485 socket works for me.

  10. Like
    Gerry R got a reaction from MdF in SunSynk 5k radiator temperature as displayed in Solar Assistant   
    OK. I need to do some investigation. Seems like I had an error in a function node reading the DC temperature and it is now giving a correct reading. Now 64,2 degrees and AC (or radiator) at 44 degrees.
    The 70 degrees must have been just before the fans kicked in. The inverter is in the garage so cannot hear when fans come on.😜
     
  11. Thanks
    Gerry R reacted to Chris Hobson in Hi and Hello from EL(plus a question or two)   
    Solar panels are divided into groups each witha bypass diode. If there is any shading the bypass diode "isolates" the affected group and the shading has less of and impact but still a small amount of shading can lead to loss of production to a far bigger area. This affected panel then acts as a "kink in the hosepipe" for the other panels in series with it.
    https://www.e-education.psu.edu/ae868/node/875

Account

Navigation

Search

Search

Configure browser push notifications
Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.