-
Solar MD 14.3 not in sync
Good day all, I hope someone can shed some light on my query below. I got a 3rd Solar MD 14.3 and a 3rd Victron Multiplus II 48/5000 installed in January 2024 the BMS was faulty and only repaired in May 2024. My initial installation was done November 2022 which consists of 2 x 14.3 Solar MD, 2 x Victron 48/5000 Multiplus II and Victron MPPT RS 450/200 with 11.2kw solar panels. The new battery does not discharge or charge at the same rate as my older 2 batteries. The installer assured me the cables are of the same length. I have 3 x Victron 48/5000 Multiplus II to charge the batteries from Eskom and Victron MPPT RS 450/200 with 11.2kw of solar panels. Is this normal that the newer battery will charge and discharge at a different rate? Capacity % is always different to what my older 2 batteries indicate, current in and out is aslo different. I have the Solar MD logger and I am able to view device history charts.
-
-
-
-
ReVOV Batteries - Your Opinion Please
Hi, yes I use Carplounge BMS
-
ReVOV Batteries - Your Opinion Please
Hi guys, I connected 2 x 12v 200ah Revovs in parallel in my bushlapa When in idle the one battery draws amps from the other battery. 2.5 to 3.5amps Positive from one battery goes to a Fuse then Positive busbar and Negative from the other battery goes to Victron Shunt (BMV 700) then to Negative busbar. Any advice will be appreciated.
-
-
Mecer 2400va Trolley - Can I add solar regulator?
Yes I used the Victron 75/15 for many years. The 100/20 will work.
-
-
-
So the Victron journey has started...
@Tim003, I made it myself. Cheers,
-
-
-
-
So the Victron journey has started...
Been using aircon at night and 4kw geyser from 04:30 - 05:30 in the morning The Big test will be in winter time 🙈
-
-
-
So the Victron journey has started...
-
-
So the Victron journey has started...
-
-
-
-
So the Victron journey has started...
-
So the Victron journey has started...
-
So the Victron journey has started...
Thanks for the tip 👍
-
-
So the Victron journey has started...
Hi, the panels were R2 996 ea.
-
So the Victron journey has started...
-
So the Victron journey has started...
Good evening all, Collected the first batch of equipment for my 10kva home installation. (2 x Victron Multiplus II 48/5000 & 1 x Victron SmartSolar MPPT RS 450/200) 2 x 14.3kwh Solar MD batteries and 28 x IBC 400W Solar panels to follow. Extremely excited about this journey. I'll try to post the progress, we start on Thursday, whoooo haaaa!
-
IBC Solar GA solar panels
Good day, Anyone any feedback on the above mentioned solar panels (370W Monocrystaline) Either them or JA Solar Perc Half Cell. Regards,
Peyper
Members
-
Joined
-
Last visited