Got a GeyserWise Max with vacuum tubes installed about 2 weeks ago and have noticed that the element icon flashing after the geyser reaches 55c, but my max is set to 65c. Any ideas or thoughts?

1 minute ago, grant.cpt said:

Got a GeyserWise Max with vacuum tubes installed about 2 weeks ago and have noticed that the element icon flashing after the geyser reaches 55c, but my max is set to 65c. Any ideas or thoughts?

Make sure that 65 is set throughout the week including weekends

1 minute ago, Leshen said:

Make sure that 65 is set throughout the week including weekends

It's been set as follows:

Monday > Friday
Morning: 55
Evening: 65

More showers in the evening than in the morning

Saturday > Sunday
Morning: 55
Evening: 65

I'll try it out to set block 1 and 2 (only use those two blocks) all to 65 and check

15 minutes ago, grant.cpt said:

It's been set as follows:

Monday > Friday
Morning: 55
Evening: 65

More showers in the evening than in the morning

Saturday > Sunday
Morning: 55
Evening: 65

I'll try it out to set block 1 and 2 (only use those two blocks) all to 65 and check

That should do it

1 hour ago, Leshen said:

That should do it

Thank you! Setting block 3 and 4 to 65c fixed it, even though it's not programmed to any times

56 minutes ago, grant.cpt said:

Thank you! Setting block 3 and 4 to 65c fixed it, even though it's not programmed to any times

Great stuff

2 hours ago, grant.cpt said:

Thank you! Setting block 3 and 4 to 65c fixed it, even though it's not programmed to any times

The temperature blocks don't correspond to the 4 times that you can program. See the extract from the Geyserwise manual below:

If you trying to set block 3 and 4, change the time to 00:00 - once it reaches this time press the "up" button - it will then display --:--

 

Then the Geyserwise will disregard those blocks.