TJ Human

@TJ Human I have asked a mod to move your thread to classifieds. You should get more views there. 
Also, please use the templates provided.

@zsde just a update. The drivers was the problem connecting to the inverter. I made contact with Growatt overseas, got the new drivers and problem solved. New firmware installed so hopefully everything is working properly now.

@thoc sorry,appernetly they did update the firmware on the battery.

I am taking my battery in tomorrow to update firmware if everything goes according to plan. I will keep you guys updated how everything goes.🤞

I am taking my battery in tomorrow to update firmware if everything goes according to plan. I will keep you guys updated how everything goes.🤞

For what its worth. I have installed a few growatt inverters with Dyness Batteries.
My settings on the ES is Li and protocol 1. Cable that I use is the black cable black boot on the in port on the battery and orange boot in the RS485 port on the inverter. Dipswitches 0110 on master and the rest 0000. This setup is working without a hitch
TL is a bit more finnicky. Also the same black cable with black boot on IN port on battery and orange boot in the BMS port.
Battery DIP settings 0110 on master and the rest 0000. With the TL you will have to play around with the protocols. setting is Li and protocol 1 or 2. Start with 1, powerdown the inverter completely and restart. error 04 will show for about a minute then dissapear. if you get an error 20 after restart try protocol 2. 
PLEASE REMEMBER TO POWERDOWN EVERYTHING COMPLETELY AFTER YOU MADE CHANGES. it works, dont know why but it does.
hope this will help someone

I got it working on Li mode in setting number 5 and on protocol 01. Number 2 and 3 dipswitch set on on the battery and I got a cable with the battery for the SPF 5000 es battery and using port RS485 on inverter and seems to be working fine now.havent tested it with loadshedding yet so will see how it does. How do I check which firmware the inberter has on?