Valken

You can get it from Download - ICC Software Jaco did NOT design the software and he is selling illegal counterfeit software!!! Manie from ICC is the only legal owner of the ICC software.

Here you go @JacquesVDM http://www.mppsolar.com/manual/Watchpower (off-grid)/Watchpower 1.13/

Hi All, So for those that has been running Pylontech's for a while now, how fast does your Total AH drop? I have had my 2X 3.5Kw Pylontech batteries for just over a week now and noticed that my "Total AH" Capacity has already dropped from 148 AH to 147.93 AH? Is this normal? At this rate i will never see 10 years life?

Inverter Sold!

Hi Anarchy05, I will accept the offer. PM me your details and we can take it from there.

Hi All, Axpert Inverter MKS 5K-48V 4000W MPPT is now available again.(Finally got my new inverter) Perfect condition and includes parallel kit R8000

Hi All, My apologies. I still have the inverter but i was let down (Due to high demand) with my replacement unit. I will put up the unit soon again. Sorry for the inconvienience. I will still honor first members that responded.

I have a Axpert MKS 5K for sale at R6000. Unit is just over 2 years old and also has a parralel kit. Still in perfect condition.

Anyone perhaps have an extra 2nd hand Trojan T105-RE for sale or lying arround? One of mine just went dead...

Thank you for all your time Mike. One last thing that i cant seem to find. What is the Bulk charge voltage for the unit? I have 8X Trojan T-105 RE batteries

Ah ok makes sense. Thank you. Your honest opinion, is the Imeon worth it? (I have read all your posts on the forum) And what is your current best price? Thanks again for the info.

Hi Mike, Lol, Nice. Yes i am willing. One quick question i just cant seem to find a definitive answer on. The Maximum power of 6000W in the manual states for 3 seconds? Is this total combined load? i.e when the house demand is 4000W and solar is say producing 2000W, i understand that the remaining required (2000W) will be puled from the grid and/or batteries? Does this then mean i am over the 3000W (Only available for 3 seconds? or 6000W only available for 3 seconds) limit or is that just for Solar/Batteries? Hope this makes sense? Thank You,

Hi Mike, Is the Imeon still available?

Ah Ok. I am looking at replacing my Trojan T105RE's They are barely 1 years old but it seems one of the 6V Batteries unfortunately got some damage... Not sure if it is viable to replace just one?

Where are you in Centurion Weasel? I am in Wierdapark. Maybe we can arrange a viewing?

Hi weasel. Are these still available?

Am i charging with too little AMPS? My Axpert MKS 5KVA is set to 20AMPS?

Good Day All, Hope someone can shed some light? I have 8X Trojan T105RE Batteries (48V - Just under a year old) connected to my Axpert MKS 5KVA Inverter. Lately i have noticed it didn't go to Float and although the AMPS drop to about 6/7amps it never goes to float (54V) I topped up all the batteries 3 days ago and set the inverter to not use the batteries so it can charge constantly. 3 days passed now and it is still sitting on 58.8V and arround 6/7amps charge? Any ideas why?

Thank you for the reply SuperDIY. So does your SOC go to 100% at the "correct" time?

Thank you Chris. I will try that and I think I'm also going to use a longer detection time especially since i cant charge at full specified voltage. Last I checked it was just under 5 amps

Thank you for the feedback Chris. I have mine set similar. But it still goes to 100% like hours before it should.

Thank you Chris! I started out with that video from your very earlier posts. I am afraid however i just don't get it or it just doesnt seem to work for me or i am really doing something wrong. @superdiy @viper_za Would you care to share your settings - Just want some point to start with. I must say this is my first Flooded batteries (Trojans T105 RE's) They have been charging since around 11am this morning (First charge from factory) Thank you TTT! And they are right now still Bulk charging? (Sitting at 58.4V and around 6A now) Is this right?

Hi All, Ok, let me start with directing the question to SuperDIY and Viper as you guys have the same equipment. 1. At what voltage do you charge your T105RE's and at what voltage do you float? 2. What setting are you using on your BMV 702 for charge detection and tail current? My SOC goes to 100% way to quick. I just have the one bank of (8 X 6V) T105RE's Thank you, Regards. Valken

Sooo... My Axpert 5KVA cant fully charge my 48V (8 X 6V) Trojan T105 RE's? I thought they have a lower bulk and float? So with those figures - Bulk Charge = 2.46 X 24 = 59.04V and float = 2.25 X 24 = 54V