SYC

My 2 cents worth I was advised to install: https://nistcontrol.com/product-category/1-phase/ to protect my pump

Hi Guyz, Need some advise on combining: 4 x Narada AGM 200ah +ha02 and 4 x Algrande Gel 200ah +ha02 to form 48v 400ah Bank Pros and cons?

Reason for sale please?

Check with Rubicon 011 907 7456

No disrespect to anyone but I have tried calling Gary and he never ever returns call or answers. His pricing however is very good. Service however questionable. Might be only my experience

@GVC you are a star thanx for all your help and pin point instructions. Really appreciate

The main reason is that: 1. Longer up time if need be 2.I have everything 3.One system has Pylon and the other Gel which doesn't get used

Wont the Axpert run out of battery first?

Not exactly. Inverter 1 runs only pool pump +- 900w for 6 to 8 hours during daylight/sunlight hours that is it no more Inverter 2 runs all house essentials all day from solar and from 1:30am on pylon batteries till sunrise I can swap it need be but Infini has been working flawlessly with loads even during load shedding I must say I'm extremely impressed as to how efficient it has being Both Inverters thus far have impressed me being a newbie and actively using them for 10 months now

I have everything already. Maybe I could connect it with in such a way that when there is load shedding only I would manually switch so that I have longer uptime in the house only needed at night

Too get longer up time on Infini Coz it feeds the houses (average load 1100w only max 3000w when inverter aircon is switched on) Axpert only runs pools pump during the 6 or 8 hours (max load 900w) My thinking it would help but of late I must says it's been way more stable

Quick one guyz, AV input from Mains to AC input of Axpert inverter, AC output of Axpert to Infini Solar AC input and AC output to Load (in my head should be possible) Pros, Cons or am I nuts?

I believe this is all you'll need. Bought from Communica fro my geysers

You need to set at 75 amp coz you have 3 pylons and the built in BMS sorts charge sync and distribution accordingly. They all charge simultaneously.

25 amp per Pylon

US3000 should be installed as the master/first battery

Hi I managed to sort out thanx

Hi I would highly appreciate it if someone could assist with getting view power running on Pi I have installed but have been away from linux for quit a while

Spot on Jaco 👍 Spoke to PSS today going to get one of those units next week

Found this online

Thank you, Was advised to install surge arrestor which I will be doing this weekend

Thank you. Jaco Boet I live in SA need I say more!!!🤔 Is there no other device that fits into DB ?

Hi Guyz, Grid voltage in my area fluctuate a lot between 247V and 195V, I've seen Grid tied system but running off grid,no feedback Is it possible to install some type of AVR (UPS or some type of device if any) between Main AC and Inverter AC input to regulate voltage better ?

Try Ellies they have small 600w trolley with MPPT controllers in store https://www.ellies.co.za/product/ups-and-inverter-with-trolley-modified-sinewave-600w1000va/

Very Neat. Well done. I'm Blue with envy!!! Coz I only wish I could offered Blue. To Power forum Team they are extremely helpful is every way. They are so called a few men apart!!! Very hard to find in today's time.