irekz

thank you very much!

Hi Youda. I have 6x US2000 Plus batteries, those were on FV2.0 As per instructions flashed all of those with us2000b_v2.9_Crc.bin, but in the BateryView and "info" command I can see version v2.8: Is this expected or is the file attached not correct? Thank you for your excellent guide!

I guys. I would like to share my schematics and source code for a small project that allows to control/monitor and intergate Pylontech batteries with home automation via WiFi. Here is a video of this in action: https://youtu.be/7VyQjKU3MsU Schemetics and source code: https://github.com/irekzielinski/Pylontech-Battery-Monitoring/ Hope you find it useful Cheers, Irek

Makes a lot of sense. Thanks mate

Found the problem: Sofar allows you to connect to pylons using RS428 or CAN. After adding 5th battery - Sofar could not see it when connected wia RS, but when I switched to CAN problem was resolved.

Found the problem: Sofar allows you to connect to pylons using RS428 or CAN. After adding 5th battery - Sofar could not see it when connected wia RS, but when I switched to CAN problem was resolved. Thanks you guys for your time and help

Does anyone have Sofar me3000sp with more than 4 pylon us2000b batteries? If yes - what is “Battery Capacity” that inverter reports in “System Information” menu for you? On my system it shows 200ah - should be 250 for 5 batteries.... confusing! Do you guys see more than 200ah? Cheers 🙂

Thank you. I also got 5 batteries. Do you happen to use Sofar me3000sp inverter? If yes - what is “Battery Capacity” that inverter reports in “System Information” menu for you? On my system it shows 200ah - should be 250 for 5 batteries.... confusing! Cheers!

Nice setup! I'm thinking about buying a rack like this one. Do you use any shelves or mounts to support the batteries - or are those attached at the front only (with screws at the front)? If front only - is there any issue with sagging? Thanks! Irek