broloks

UP5000 is lifepo4

I have also tried, no response thus far.

I am interested, please share contact details. Not sure if this is same advert as other one.

I am interested, please share contact details

Price and location?

Hi @rylan76, I am trying to assist my father-in-law integrating his DSE with his Deye inverter. Can you maybe tell me who did yours? Thanks

It's Home Assistant with an ESP32 connected to the Deye to do reading/writing of the sensors.

I also have a Deye 5kW, and 12 x 545W Canadian panels. I have seen the DC solar power go over 6 kW and when there is grid you can get close to 8kW output due to AC passthrough. Attached is a pic of mine the other day with high usage, note that the inverter did not complain with an alarm or anything. Just took a screenshot now with solar at 5.7kW, so it can definitely provide more than 5kW from solar.

One difference I can see is that US3000C has 6000 cycle life (like US3000) whereas UP5000 has 4500 cycle life. US3000C has 37A discharge current whereas UP5000 has 50A. I have US3000C and would rather go for something with a longer cycle life if I was you.

I don't think it would be an issue, if your battery communicates with the inverter then it will limit power draw from the battery to protect it.

Thank you, so it looks like my temperatures are normal, but I will get a small fan in any case as the installation area is quite warm at this time of the year.

Mine does not have a fan and the temperatures goes quite a bit higher. It is installed in a covered area with one side open to the elements.

Hi, What is the normal range for the AC and DC temperature of the Deye 5kW inverters. Mine goes relatively high but I am not sure if it is something to be concerned about or not. I cannot find any documentation on this, the manual only talks about the ambient temperature as far as I can see.

Works as you explained, thank you.

Thanks for the reply. I will test it as soon as Eskom comes back online and then revert with my findings.