October 15, 20232 yr Author That’s just how they installed it… should that cable be connected? also the battery size seems to be fine considering my load at night is around 400w?
October 15, 20232 yr If your load is so low, why two inverters? Something isn't adding up. Either your load is way higher than stated or your inverter(s) are setup incorrectly
October 15, 20232 yr And yes, ideally you want BMS Comms setup for reliable SOC, but you can run perfectly fine in user defined voltage mode
October 16, 20232 yr On 2023/10/14 at 6:33 PM, Scorp007 said: Some good questions but perhaps one need to know what load was actually connected and duration. Battery make and model is essential as you pointed out. I also just realized the self-consumption of 2 inverters is probably going to be quite high.
October 16, 20232 yr 17 hours ago, madness_za said: And yes, ideally you want BMS Comms setup for reliable SOC, but you can run perfectly fine in user defined voltage mode The LBSA is a seplos BMS which won't work with Voltronic inverters without solar assistant unfortunately.
October 16, 20232 yr 3 hours ago, jumper said: The LBSA is a seplos BMS which won't work with Voltronic inverters without solar assistant unfortunately. Something op should've checked before purchasing
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.