Everything posted by Chloe
-
Has anyone here imported LiFePO4 cells from China successfully?
Also have a look at this guys build.
-
Has anyone here imported LiFePO4 cells from China successfully?
There's a few other guys on the forum that also went the DIY route so you should be able to get all the advice you'll need but I know most have gone the Bain's route.
-
Has anyone here imported LiFePO4 cells from China successfully?
@Delta9 also have a read here
-
Has anyone here imported LiFePO4 cells from China successfully?
https://lithiumbatteriessa.co.za/
-
Help with completion of Application forms, For the connection of Grid Tied Small Scale Embedded Generation. PV Solar Panels.
Have a read here
-
1620w worth of panels producing a maximum of 1000w.
Sorry not that clued up on car audio but its still not the right type of cable. I know some guys use battery cable. I've used some thick speaker cable as specially if you're running a few big speakers.
-
1620w worth of panels producing a maximum of 1000w.
He said it looks more like speaker cable but I da agree with a photo of the cables otherwise we're just speculating!
-
1620w worth of panels producing a maximum of 1000w.
It's not 6mm solar cable.
-
1620w worth of panels producing a maximum of 1000w.
Yes basically your solar cables should be the size of your current battery cable and the battery cable about 3 times that. As for the installer... always the case... I've even seen guys use 1mm housewire.🤪
-
1620w worth of panels producing a maximum of 1000w.
Yip sorry I missed the parallel so it seems all your cables are incorrect.
-
1620w worth of panels producing a maximum of 1000w.
Ok missed that one 😉 then 6mm would be under rated as well thats only 54amp. That leaves him with 10mm solar cable rated at 75amp. That means all his cabling is incorrect.
-
1620w worth of panels producing a maximum of 1000w.
I said I prefer 70mm but he should at least have a 35mm.😉😉
-
1620w worth of panels producing a maximum of 1000w.
I used a simple online calculater which converts gauge to mm to mm2. You don't have 20 panels so 4 mm2 solar cable should have been fine for your set-up. Unless you are refuring to this type of cable.
-
1620w worth of panels producing a maximum of 1000w.
That's why I said it should be at least 35mm.
-
1620w worth of panels producing a maximum of 1000w.
According to that calculation you should have at least a 2 gauge cable or 35mm on your batteries.
-
1620w worth of panels producing a maximum of 1000w.
Did a quick check online and it seem your solar cable should be ok but there's still the question about them feeling warm??? But your battery cable is incorrect for the batteries you are using it should be the same size as in your car.
-
Inexpensive hybrid inverter suggestion
@Dani you won't go wrong with a Sunsynk!
-
1620w worth of panels producing a maximum of 1000w.
You would have huge losses and a potential fire risk if those cables are incorrect.
-
1620w worth of panels producing a maximum of 1000w.
It sounds like your "installer" used the wrong tipes of cable we would normally recommend 6mm solar cable and 70mm battery cable that's tipictly the size of your car's battery cable if you want to compare.
-
Electricity-self generation
Hi all, I would be the first to admit I do not pay much attention to what our President says but I recently came across one of his resent newsletters that tickled my fancy in particular this section: "In an effort to facilitate electricity self-generation and as part of the reform process, we have removed the licensing requirement for self-generation projects under 1 MW. So far 156 self-generation facilities under 1 MW have been registered, with a total installed capacity of 72 MW." http://www.thepresidency.gov.za/newsletters/desk-president%2C-monday%2C-28-september-2020
-
Software Alternative to ICC
@VicVic take a look here
-
Great Sunsynk and Storage Options
Hey guys is this for real? Wow, a 3.6KW Sunsynk inverter! Bye-bye Axpert and clones! 🤣
-
Victron experience....blue stuff is getting me red around the cheeks!!
Maybe you should look at the Sunsynk inverters as well I know they offer excellent after sale service.
-
Hello World
https://www.pv-magazine.com/2020/08/14/ja-solar-launches-800-w-solar-panel/?fbclid=IwAR2JqQaowaapu0KLduSImNLhWRdZBInKQGnnSxBZCJoDFCKRcDKBqYF6cOM 39kg Imagine having to put that on a roof!🤪
-
Hello World
Welcome to the Powerforum family @Delta9!