_terminal Posted April 21, 2022 Posted April 21, 2022 Is there a way to turn off the Wireless AP that the Solarman data logger has created? e.g. "AP_xxxxxxxxxx" Quote
Soutsuur Posted November 30, 2022 Posted November 30, 2022 Have you found a solution yet. My Sunsynk datalogger's Wifi AP interferes heavily with my building Wifi access points. Quote
recre8 Posted November 30, 2022 Posted November 30, 2022 For the solarman loggers there is a secret menu where the mode can be switched to station only. Access the logger with a browser and log in. Then go to “http://xxxxxx/config_hide.html” Not sure if the new Sunsynk logger also has this. RaeesD, p_i and werner.potgieter 1 2 Quote
shovelhead Posted December 1, 2022 Posted December 1, 2022 I have an option for AP+STA or AP/STA. I'm guessing @recre8 is suggesting to try AP/STA ? Quote
rkistner Posted December 5, 2022 Posted December 5, 2022 Changing to AP/STA worked for me to disable the AP (Deye inverter with Solarman logger). Quote
shovelhead Posted December 10, 2022 Posted December 10, 2022 @rkistner I can change mine to AP/STA, I save and restart as required. Upon restart, I'm back to AP+STA? Quote
RhysMcW Posted December 10, 2022 Posted December 10, 2022 yay, thank you @recre8 I just changed mine to AP/STA, which has remained after its restart, and now the AP is no longer broadcasting, been looking for this for a while... Quote
Soutsuur Posted December 12, 2022 Posted December 12, 2022 It seems the Sunsynk logger does not have /config_hide.html. Must be some other hidden page, if any. Thanks for the response. Quote
BertilDator Posted February 7, 2023 Posted February 7, 2023 (edited) For me it behaves the same as for @shovelhead, i.e., changing to AP/STA doesn't persist the restart. Using FW LSW3_15_FFFF_1.0.65. Is there perhaps some older or newer firmware I could try? Edited February 7, 2023 by BertilDator Quote
system32 Posted February 8, 2023 Posted February 8, 2023 On 2022/12/12 at 3:29 PM, Soutsuur said: It seems the Sunsynk logger does not have /config_hide.html. Must be some other hidden page, if any. Thanks for the response. Pity that there is no hide option. SunSynk needs to add a password to the logger screen - not good for security. Quote
vinoyrosas Posted May 30, 2024 Posted May 30, 2024 The answer of recre8 works for stick logger LSW-3 (firmware version LSW3-15-FFFF-1.0.96). Thanks a lot. Quote
EuropeSolar Posted December 28, 2024 Posted December 28, 2024 Thanks, recre8. AP/STA survived the reboot. Firmware LSW3_32U_5406_1.06 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.