Is there a way to turn off the Wireless AP that the Solarman data logger has created? e.g. "AP_xxxxxxxxxx"

 

Have you found a solution yet. My Sunsynk datalogger's Wifi AP interferes heavily with my building Wifi access points.
 

For the solarman loggers there is a secret menu where the mode can be switched to station only. 
Access the logger with a browser and log in. Then go to “http://xxxxxx/config_hide.html”

Not sure if the new Sunsynk logger also has this.

I have an option for AP+STA or  AP/STA.  I'm guessing @recre8 is suggesting to try AP/STA ?

Changing to AP/STA worked for me to disable the AP (Deye inverter with Solarman logger).

@rkistner I can change mine to AP/STA, I save and restart as required. Upon restart, I'm back to AP+STA? 🤔

yay, thank you @recre8
I just changed mine to AP/STA, which has remained after its restart, and now the AP is no longer broadcasting, been looking for this for a while...

It seems the Sunsynk logger does not have /config_hide.html. Must be some other hidden page, if any.
Thanks for the response.

For me it behaves the same as for @shovelhead, i.e., changing to AP/STA doesn't persist the restart. Using FW LSW3_15_FFFF_1.0.65. Is there perhaps some older or newer firmware I could try? 

Edited February 7, 20233 yr by BertilDator

On 2022/12/12 at 3:29 PM, Soutsuur said:

It seems the Sunsynk logger does not have /config_hide.html. Must be some other hidden page, if any.
Thanks for the response.

Pity that there is no hide option.

SunSynk needs to add a password to the logger screen - not good for security.

The answer of recre8 works for stick logger LSW-3 (firmware version LSW3-15-FFFF-1.0.96).

Thanks a lot.

Thanks, recre8. AP/STA survived the reboot. Firmware LSW3_32U_5406_1.06