dino_coder

@Greglsh Unfortunately my design skills are very limited. It's simple to just modify existing print models. You could try scaling down the model. Found some 92mm fans on bobshop https://www.bobshop.co.za/category/20349/Computers_Networking_Components_Fans_Heatsinks_Cooling_Case_Fans.jsp

Removed the skirt to fit on a 235mmx235mm print bed. Deye_92mm_Fans_edit.stl

Thanks for this @Ar135. Was about to give up but disconnecting the VCC I managed to get readings from the inverter (Sunsynk 5kW).

I've experienced the same issue. Started going offline for short periods after a year in use, then offline time increased and eventually stopped working. Returned it to the supplier who replaced it (Firmware: LSW3_15_FFFF_1.0.84. Previous firmware was 1.0.72). Been working for a few months but the same issue started occurring. It's a piece of crap.

Please share the Thingiverse link

Off topic... Use the Deye app instead. Much more info and fancy graphs. Login with your Solarman credentials. https://play.google.com/store/apps/details?id=com.deyesolar

I also tried set it to shorter intervals without any luck but I'm ok with updates every minute or so. Perhaps log an issue on the github.

Super easy Solarman data logger integration with HA. https://github.com/StephanJoubert/home_assistant_solarman Edit: Just to clarify, I'm not the author. The author is quite active and responds to queries within a day or so.