An3s.

Just enable overload bypass Works for me

Play with this feature on salar assistant,, on setting just use Emulated BMS Hope this helps

Same inverter as you,,Mine does the same,,when I increase the loads past 250w then everything works as it should

Made koffie on solar best feeling ever

Thanx for all the help,, its been a while now a lot happend, bricked my inverter had a must inverter while the kodak went for repairs,, I have 6 pannels now with 4x200ah batteries The bluetooth on the inverter just wasn't doing it for me so I got solar assistant As my house has a lot off sonoff devices I can manage my loads when there is loadshedding

SBU and SOL both work just check what works for you Settings 20 try 26.5v

I would be interested if still available

Mmm I want this

I dont have the most sonoff devices here but I have been a fan for a long time only managed to blow 1 of them ever but that was my own fault, Im looking for a device I can install in a plug

That is what I'm doing sonoff on inverter side with relay to mains for a trigger when mains go off,then just run you custom scene,in my case loadshedding fish tank heater,washing machine and extra outside lights off. Will add more as I get more smart switches

I WANT

This would help a lot

Lol forgot to say got angry a bit clipped off all my panels connetors and replaced them with no change in my problem

How do I update firmware with usb? Tried to upload a vid but its to big. Most I got from the panels was 600w an the rest on grid yesterday at 2 asked my wife to run the microwave. Think most amps I got was 3 to 4

I did and then my inverter starterd beeping and low battery alert, don't think its a cable problem as its 6mm² and 7m long Mabe over the weekend I will add a extra breaker in my DB and run my kitchen aswell. For now it seems I have an expensive loadshedding backup system for my lights an living room lol