francois

Welcome @PhilFM System is looking tops!

The inverter also uses electricity to function, so my guess is that the 400w increase in daily consumption is the inverter's use of electricity to function.

@Allsorts I am not familiar with the Goodwe inverters, but since it is a hybrid, shouldn't it supply the excess from the grid when available? Do you also have solar panels?

The recommended discharge current per battery is 37A. With 2 batteries that gives you 74A @ 48V = 3.5kW.

The 2 x US3000 Pylontech's are capable of more than the 2.3kw back-up rating of the inverter, so they are probably not to blame. What kind of high loads are you referring to?

@CliveS

Can you possibly get the rest of the specs like the sample below.

Can your installer/supplier perhaps confirm the specs?

Hi @CliveS, do you perhaps have the specs of your solar panels?

Could you please post the specs of the panels? Might help.

Hi @CliveS, Is the attached datasheet the one for your inverter? If so, I see the MPPT operating voltage is between 60V and 115V. In your one screenshot where the unit is working correctly, you can see the voltage is at 107V (within the limit), but in the other screenshot where it is not working the voltage is 121v (outside the operating limit). I am not sure if this is your problem, but maybe worth investigating. Like @Rclegghas said, it's possible that the panels are wired incorrectly and during certain conditions the voltages are exceeding the limits of the MPPT, and then it shuts down. Synapse 50 48V OffGrid Inverter.pdf

Hi @GordonH, looking forward to seeing the end result. You must be counting the minutes.

If you have the pin-outs of the correct cable you can have it made up by someone like an IT shop.

The dust covers at the top on the inverter also gets clogged with dust.

Okay thanks for confirming. Mine looks the same.

Hi @wolfandy, how does your ICC PV graph look during the day? Is it smooth or does it have these little dropouts throughout the day?

I think the modbus card has different dipswitch settings for smartmeter vs battery comms? Edit: I am not sure of this. Perhaps @Youdacan advise?

That's strange. Might have to ask Manie to check for you.

Hi did you stop ICC before turning the slider on? You also need to enter your system ID in the other space provided. Afterwards you need to save the settings and start ICC again.

@Rcleggconsider creating a PVOutput account and uploading your data via ICC. Its a nice way of keeping track of your system stats like record dates etc. ICC will automatically upload the data

Ah okay! 👍 Your system is flying!

Awesome @Rclegg glad things are looking better. Strange that the MPPT is still showing 30A.

😂😂 One can never have enough Pylons!

Great result! Glad it's working fine now. Would be great to see how it runs tomorrow

Damn! 🤣Good idea to change the config before it goes up in smoke.