Jakac
Members
-
Joined
-
Last visited
-
Bought from Powerforum store. Not needed anymore
-
Hi everyone As the title say. I am looking for a single freedomwon etower battery. Pease private message Thanks
-
Oops, can i offer R2200 for the distributor?
-
Hi, Item: Victron Lynx Distributor 1000 DC Price: R2700 -> R2200?? 🫢 Link: https://herholdts.co.za/pd6682/ci133/victron/victron%2Dlynx%2Ddistributor%2Dm8.html
-
Victron system is superior in terms of reliability, durability and efficiency. They are hardly affected by poor grid, weather or inferior electrical appliances They will last longer. Very long.. Have one inverter thats been running since 2011 at my parents place Self power consumption is also very very low compared to sunsynk. My 8kw Sunsynk would use max 71watts whilst now my 2 x multis 2 5kva use just 37watts.
-
Do you specifically want a Shoto battery? I am selling my Freedomwon Etower battery
-
esmail-kassir reacted to a post in a topic:
Looking to have a continuous minimum export on my Deye 8K
-
Item: 1 x Sunynk 8kw (no box available for packaging..) Age: 2 years Price: 12k Payment Method Accepted: EFT Condition: Good - used for backup. No solar panels were connected to it Location: Midrand Reason: Moving to victron.
-
I have three for 3 years now. Good battery. Never had any issues with it. It comes with battery cable, busbars, inverte cables and a stand to place the battery Communicates well with Sunsynk and Victron
-
-
Isn't it the inverters in parallel should use one battery bank? Because they act as one inverter when charging batteries
-
You still have the unit? Boxed and working 100%?
-
-
-
Do you still have this one? Is it a 24V or 48V one? Looking for one.
-
You still have this?
-
Jakac reacted to a post in a topic:
Installing PV in George? Three month's notice to the municipality please, and a report from a structural engineer.
-
-
Quattro is a low frequency inverter and i would swap without thinking but i will keep the other for backup .. of the backup.
-
Hi peeps, I got four of these fans to cool down my inverter and other items, my challenge now is how do I connect these to a 12v supply? If possible can i use adapters with 4-pin 12V to AC? Or should i cut off the connectors and just use +ve and ground to a power supply? https://www.rebeltech.co.za/noctua-nf-b9-redux-1600-pwm-92mm-pwm-nf-b9-redux-1600p-case-fan.html
-
-
And if they use different cells with different charging/discharging parameters that will be a problem right?
