Dylan
Members
-
Joined
-
Last visited
-
Perhaps HF inverters?
-
.
-
-
AC breaker can be rated for DC as long as inline with the spec, Almost all hager breakers can be used at lower voltage and amps.
-
Price drop, R17000 😲
-
Item: BYD B Plus 2.56kWh and cabinet 4bay Age: 2020 Price: R21000 Payment Method Accepted: EFT/Cash Packaging: As shown Condition: Good condition Location: Somerset West Reason: Upgrading, used as load shedding UPS Shipping: Doubtful Collection: Yes, its stupidly heavy
-
I think you will only know if you can compare the higher frequency system and then it will also depend where you run your at (running a 4/5kW inverter at mostly 150W will give bad efficiency on most systems) and as p1000 oversize you wires keep runs short.
-
How many power surge plugs do you have? The red ones with the lights.
-
-
-
I have a Victron system and can 100% agree their support is beyond excellent, I first took it up with supplier they took it into the distributor and agreed it was faulty (even gave me a temp MPPT while mine was in (got to love the modular system)) then later had a crazy hard to reproduce issue under very specific conditions, took it up with plonkster and got tier 3 support from the Netherlands with in a day. +1 to Victron in for support
-
-
Bypass the dc surge arrestors and test again.
-
-
Just check your graph for amps and voltage.
-
Really can't go wrong with Victron
-
Earth leakage yes lots of info amd causes, if mains less so not sure then
-
Pretty sure you need to load up the assistant in veconfig
-
Old post, but you missing the "nett consumer" aspect completely.
-
-
-
Dylan reacted to a post in a topic:
COCT Generation of set Insentive makes batteries to expensive !!! Well done COCT
-
-
-
So to be clear, this system is a standby SSEG - alternative supply and not a standby SSEG passive UPS as an off grid hybrid SSEG (grid assisted and interconnected with electrical installation) I ask too as need to register with the CoCT and have for the most part the same install just another L+N suppling the inverter. Did you installer omit the AC in to the inverter?
