Solar Installers!   You're invited to join @James Frank from Solis as he takes you through all the technical specifics of the new Solis Advanced Power Hybrid inverter series.  

Places are limited so click here to book your place.  Sessions at cities across the country.

https://www.eventbrite.com/cc/solis-south-africa-product-training-2172979?utm-campaign=social&utm-content=creatorshare&utm-medium=discovery&utm-term=odclsxcollection&utm-source=cp&aff=escb

 

Edited May 15, 20233 yr by Claire Gardner

On 2023/05/15 at 1:26 PM, Claire Gardner said:

Solar Installers!   You're invited to join @James Frank from Solis as he takes you through all the technical specifics of the new Solis Advanced Power Hybrid inverter series.  

Places are limited so click here to book your place.  Sessions at cities across the country.

https://www.eventbrite.com/cc/solis-south-africa-product-training-2172979?utm-campaign=social&utm-content=creatorshare&utm-medium=discovery&utm-term=odclsxcollection&utm-source=cp&aff=escb

 

Greetings Clair Gardner

 

Thank you!

 

 

Best,

Daniel

Done, booked for 1st June Cpt

Is this the same training I attended which Segen did a few weeks ago on zoom?

Ignore my question
I see its for the cool new S6 Advanced Hybrid Inverter.

Edited May 17, 20233 yr by WannabeSolarSparky

On 2023/05/17 at 11:20 AM, WannabeSolarSparky said:

Done, booked for 1st June Cpt

Is this the same training I attended which Segen did a few weeks ago on zoom?

Ignore my question
I see its for the cool new S6 Advanced Hybrid Inverter.

I have seen the spec sheets for this new Solis S6 Pro hybrid inverter ( 5kW 6kW and 8 kW sizes )

Photos look really awesome and could be some serious competition for the other popular hybrid
Will have more knowledgeable info after tomorrow

I believe this new Solis S6 Pro hybrid is going to give the Sunsynk/Deye a good run for it's money
That sometimes confusing E/N Bond issue is now taken care of internally in/by the inverter
That pesky CT coil polarity can now be changed via the inverter settings, though would still need to be installed in the correct location 😉

Micro inverter can also be connected to either the AUX/GEN port OR even onto the Essentials port

Edited June 1, 20233 yr by WannabeSolarSparky

Thanks to @James Frank from Solis for the great intro to the new Solis S6 Pro Hybrid Inverter
And those gloves nice touch, now my fingers will survive a few more installations.

3 hours ago, WannabeSolarSparky said:

I believe this new Solis S6 Pro hybrid is going to give the Sunsynk/Deye a good run for it's money
That sometimes confusing E/N Bond issue is now taken care of internally in/by the inverter
That pesky CT coil polarity can now be changed via the inverter settings, though would still need to be installed in the correct location 😉

Micro inverter can also be connected to either the AUX/GEN port OR even onto the Essentials port

When I entered the solar wilderness 2 years ago , the Solis was my first choice , purely based on being highly rated in Aus and Europe, the only reference I had at the time. It was just a wee bit too expensive for my budget , but I must say since then I still rate it after experiencing the product and its performance .

Edited June 1, 20233 yr by BritishRacingGreen

Although using 2 x grid tieds I still rate them highly. They did offer great operation on the RHI older model but then came the Sunsynk. 

From my experience one can see some brains were behind the older models. 

I trust mine so much my 2nd one is mounted above the ceiling. No need to see it or press any button. It just does what it should do.