February 2, 20206 yr On 2020/01/14 at 5:38 PM, Chema said: Dear Mike, Can i have the factory password, thanks in advanced Best regards Try "administrator"
April 4, 20206 yr On 2017/02/20 at 7:02 PM, SilverNodashi said: Hi, Please PM me the password as well? Hey there, is it possible for you to provide me, with the 'factory password' as well ? Thx in advance ! Kind regards Smirnoffdk
April 5, 20206 yr On 2020/02/02 at 8:42 PM, ETC said: Try "administrator" ‘Administrator’ is the standard password, but there are certain special setting, that only can be changed, if you got that ‘factory password’ the reason it’s not in the manual, is that you can actually destroy your inverter, with the wrong setting ! So caution is advised!
April 20, 20206 yr Hello! Can you also send me the "factory password" ? I want to look in the parameter setting (the settings that aren't shown up in the standard log in) because my Infini Solar 3kw won't switch back to PV and Battery if Overload.In the evening the grid it charges the batteries from the grid or it uses only grid power, even if batteries are 80% full (I have 4 x200A 12V gel batteries). So mainly it doesn't switch back automatically to PV and batteries from grid power in Offgrid mode. I understand that it should take from the grid only if the load exceeds the PV and Battery capacity. Thank you in advance.
May 4, 20206 yr Sir I have infini 3kw inverter need factory password to change frequency settings range as in Pakistan the frequency is gone to 50.5 hertz
July 4, 20205 yr I have the 5.5kw inverter, is the password the same? Can someone send me the factory password as I'd like to discharge my batteries to the grid with no PV and change the standard to 83g I'm in UK
September 7, 20205 yr Hi Guys does anyone have the factory password for this unit...I need to adjust the upper frequency parameters...
September 8, 20205 yr As stated many times, the inverters itself do not have a password - only SolarPower software wants one when changing major settings. The password can be found in this manual hys-3000-ba-de-neu on page 16, right after the word "Werkspasswort". It is also posted here: infinisolar-3kw-plus-factory-password in the last post. This is valid and working on all voltronic invertes that get configured with solarpower.
October 11, 20205 yr I need the factory password too for my Infinisolar E 5.5KW to lower the "max feed in grid power" from 5.500W to 3.600W because the wire from the inverter to the main main surge protection box is just for 16amps = 3.700W Would be very helpfull if somebody PN me the password. Thanks very much
October 18, 20205 yr Hi , Some one please share factory password for infini solar inverter [email protected] Thanks.
October 25, 20205 yr On 2020/09/08 at 10:25 PM, riogrande75 said: As stated many times, the inverters itself do not have a password - only SolarPower software wants one when changing major settings. The password can be found in this manual hys-3000-ba-de-neu on page 16, right after the word "Werkspasswort". It is also posted here: infinisolar-3kw-plus-factory-password in the last post. This is valid and working on all voltronic invertes that get configured with solarpower. Hi , EngHomam You will loose Warranty if you change something and it breaks your inverter , ( And even if your inverter fails for another reason it will not be covered ,) What setting or why do you want to change , that needs the factory password , I could help you with normal parameters to get past your problem , if i new what it was ?
November 2, 20205 yr As stated many times, the inverters itself do not have a password - only SolarPower software wants one when changing major settings. The password can be found in this manual hys-3000-ba-de-neu on page 16, right after the word "Werkspasswort". It is also posted here: infinisolar-3kw-plus-factory-password in the last post.
December 21, 20214 yr On 2021/12/12 at 6:32 PM, Sajid878 said: Please anyone send factory password on [email protected] Thanks! HI You could try this ( no warranty if you use it ) SolarPower software wants one when changing major settings. The password can be found in this manual hys-3000-ba-de-neu on page 16, right after the word "Werkspasswort". It is also posted here: infinisolar-3kw-plus-factory-password in the last post. Werkspasswort "zAxE12_ObB8ya"
October 18, 20223 yr sir please send me factory password i want to change frequency because utility not connect
January 24, 20233 yr I think factory password is just problem of PC application. There is no password in communication protocol. If you set everything by sending commands nobody can tell you that you overcome some factory password. I control inverter only this way. Original software seems to do what is not expected. For example if you change one voltage it changes also others or it might just modify values in app not in invertor but in any case it is not reliable behaviour. The commands on serial line are much safer. You change only what you really want to change.
August 26, 20232 yr Hello I have 3 inverters infinisolar E 5.5kw, i need factory password to make some changes Thank you
December 21, 20241 yr On 2020/09/08 at 10:25 PM, riogrande75 said: As stated many times, the inverters itself do not have a password - only SolarPower software wants one when changing major settings. The password can be found in this manual hys-3000-ba-de-neu on page 16, right after the word "Werkspasswort". It is also posted here: infinisolar-3kw-plus-factory-password in the last post. This is valid and working on all voltronic invertes that get configured with solarpower. You helped me a lot dude. Thank you so much ! I'm going to come over there and kiss you!
February 24Feb 24 Do I need factory password to view/change "Max feed-in to grid power" setting on Infini 10KW 3P? I need to reduce the feed-in power to grid. With administrator password in SolarPower, I'm not even seeing that parameter setting.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.