Skip to content
View in the app

A better way to browse. Learn more.

Power Forum - Renewable Energy Discussion

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (â‹®) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Irocmaster

Members
  • Joined

  • Last visited

  1.    BritishRacingGreen reacted to a post in a topic: Axpert charge controller board
  2. Thanks for the kind words Brain.
  3.    hoohloc reacted to a post in a topic: Lithium Ion replacement for AGM batteries
  4.    hoohloc reacted to a post in a topic: Lithium Ion replacement for AGM batteries
  5. Nasty people on this forums I see. O well not interested any more.
  6. Yes true they can gas very bad if hot. Remember the picks of the exploded house. Yes they need good ventilation.
  7. Cheap alternative is what I said not that lead acid is better than lithium. The flooded calcium batteries handle higher temp better than AGM batteries. (What I should have said.)
  8.    hoohloc reacted to a post in a topic: Sunsynk + Us3000C Pylon Communication
  9. Your inverter need to be repaired if your batteries are still fine.
  10. As you describe the alarm that is normal 4 beeps silence the unit is in battery mode, 4 beeps in one second continues is battery over volt.
  11. See the address settings are all the same on batteries.
  12. If you're panels are on the same direction and angle you do not need any diods. Diods on the panels are for reverse protection.
  13. Pouvez-vous m'en dire plus sur le système complet, le nombre de panneaux photovoltaïques et le type de batteries.
  14. You can check this post.
  15. I agree with Scorp your batteries are shot. Your settings for gel batteries is a bid high. The spec voltage on the batteries is @25 degrees. Voltage and charge rate must be lower at higher ambient temps in summer.
  16. Repaired on last week, with no load on battery only the display showed around 100va X3 if remembered correctly. how ever it only draw 2.9A from the 48v power supply. That is +/_ 140W idle. I noticed that on very low on no load most inverters do not measure current very accurate.
  17. Do you have the batterie BMS connected to the Inverter?

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.