MyOwnPower

Would you be willing to sell one of your AM2s seperately, interested in the one with the least cycles.

Are these still available. The new price of these are now R22000 at Solar Shop and Haroldts. I may be interested to take one at R15000.

Is this inverter still available?

Is this unit still available??

Bernd, I got the following from Imeon directly in order to log into deeper settings Username - installer.pro@local Password - PRO_Installer_P4SS Hope it helps you. Regards

Any news on this inverter??

Speedster, I Have Tigos installed and once was in contact with their Regional Sales Manager, maybe he can assist. Parminder Singh Panesar Regional Sales Director (EMEA) www.tigoenergy.com M: +44 (0) 7767618196 | E: [email protected] Via Calamandrei, 36, 52025 – Montevarchi (AR), Italy

Is this inverter still available?

I'm might be selling mine. I have an IMA Monitoring box as well as a smart meter connected to it. Stay in contact, maybe we can get to an arrangement. I stay in Cape Town.

Check out Hubble's setup videos on Youtube.

Yes you can add PVs later, basically running the Sunsynk in UPS mode with charging from the Grid enabled on the inverter.

DevE, Not sure if you managed. I noticed the following that was posted recently. https://support.imeon-energy.com/en/support/solutions/articles/80000602427-how-to-download-obtain-the-imeon-manager-software-fa47- I also have an Imeon at one of my installations, I do have an IMA-Box connected to the Inverter via USB, I can connect to the IMA-Box via WIFI. The Imeon by itself has now remote access only monitoring. However, I got around this by setting up a Dynamic DNS account and activating the DDNS function on my router. As a result I'm now able to log in from anywhere in the world to make setting changes on my Inverter. Hope that helps.

I would suggest you get yourself a Sunsynk 5kw inverter and Hubble AM2 5kWh battery combination. Should be around R50 - 55k. It then gives you the flexibility to expand later if required by adding panels. Will you be installing yourself??

And if I am not mistaking, Sunsynk will then also push updates automatically to your inverter.

Just to correct your statement that only certified installers will be able make changes to settings, that is no longer the case. Sunsynk has changed that so that owners may make changes and for the owner to authorise the installer to also do so. You may view one of their videos on Youtube where Keith confirmed this after having received many requests from owners. Regards, Rian

Agree, get another technician to check it out. Regarding NRVs, do not use the spring valves, they only handle up to 60C after which the rubber washer start to warp. Install the swing valve at an angle, one without a washer as they can handle very high temps. Scroll down on this link to see an example http://www.tecron.co.za/?controller=pages&view=load&id=spares_parts_and_accessories. Also, if you install these with a ball valve on each side to close it off you can simply open the swing valve at the top and clean it out if dirty, close again and open ball valves for water to flow again. I did that, so whenever I notice syphoning possibly taking place I do a 5 min cleaning with no need to replace the valve. Very simple. Rian

Eugene, Thank you very much. Regards

Eugene, Where did you apply?? I would also like to do so. Regards, Rian

In Sunsynk's 2nd last update on the new dongle it was mentioned that only installers that would be able to make setting changes. People complained and in the last update about the new dingle Keith said they have changed their mind and will now allow owners to also make setting changes, with owners having to grant permission to installers. I think this is a great move, as you say, if I can be a cave man and make adjustment why am I not able to do so remotely as owner. Check the blog or on Youtube channel. Rian

I also agree with Peter's suggestion, would make a great inverter a perfect inverter. The more flexibility the better. I for instance run a flat plate collector on my geyser with a Geyserwise Max installed. On the not so sunny days I would prefer to top up the geyser with grid and not use the batteries. Come on Sunsynk (Keith and co.) please give us that option. Rian

Derrick, Did you put your Geyserwise on "Holiday" Mode when you left for Europe?? That is effectively its "off". That is what you are suppose to do if you have a Geyserwise Max installed. By the way, which model do you have installed? Rian

Ian, Thank you very much. Very nice and neat setup. Regards, Rian

Ian, Just one further question, I notice on your diagram that the Earth for the Earth Bond Relay says "DB Earth". So did you connect it back to the Main DB Earth?? Do you therefore not have a separate earth spike installed for the Relays' earth connection?? Regards, Rian

@WernerH, I also have an Imeon with IMA Box. I currently have early version BlueNova batteries which do not support CAN with he Imeon. I do believe you need the IMA Box as the CAN port is located on the IMA Box. So the setup is you join the Imeon with the IMA Box and IMA Box connects with the batteries via CAN. The IMA box then runs your OS.ONE also. Regards, Rian

Ian, Thank you very much for the reply. Doing my install soon exactly as per you diagram, got the relay for the bridge. Regards, Rian