Skip to content
View in the app

A better way to browse. Learn more.

Power Forum - Renewable Energy Discussion

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Milan188

Members
  • Joined

  • Last visited

  1. Did you notice any changes on your 12kw inverter?
  2. I see there's a new 6.1kw version also.
  3. All the surge protection installed have green indicators. Is there anything in the bottom section of the inverter I can check?
  4. Hi everyone. Got a F18 AC over current fault on Sunsynk inverter after a nearby lightning strike. I have DC and AC surge protection on the system as well as additional lightning protection in the DB board. The system just restarted after the fault and everything seems to be fine. Is there anything I should be worried about? Is there anything to check? All the surge protection have green indicators.
  5. The Sunsynk 3 phase inverter manages this automatically. I have three geysers - one on each phase and it spreads the load evenly. So if each geyser is pulling 3kW and my panels are producing 6kW then each phase will get 2kW solar power and 1kw battery/eskom power
  6. Hi all. There was a very close lightning strike in Meyersdal today. When the lightning struck the power in the whole house went down for 10seconds. I have a Sunsynk inverter with surge protection on the inverter and surge protection in the DB board - all the indicators are still green and everything seems fine still. Does anyone know the reason for the loss of power during that time?
  7. Battery discharge amps. C rating is discharge amps / battery capacity. So 0.75C would be 72amps discharge
  8. Thank you for taking the time to reply Bruce. Your Greenrich batteries are awesome.
  9.    Milan188 reacted to a post in a topic: Greenrich Battery SOC Fluctuation when full
  10. Agreed. Mine is set to 0.75C it works great.
  11. Its 2C for short bursts and it can do 1.5C continuously.
  12.    Milan188 reacted to a post in a topic: Essential vs Non essential vs grid
  13. I am in the process of replacing my Leviton/HAI home automation system and I about to pull the trigger on a HDL Buspro system. Does anyone have any opinions on this brand or can they suggest alternatives. The DIY solutions (Sonoff etc.) are not an option for me.
  14.    Milan188 reacted to a post in a topic: Sunsynk 8kW / Freedom Won 15/12
  15.    Milan188 reacted to a post in a topic: Simple Sunsynk + Dyness
  16.    mzezman reacted to a post in a topic: Luxpower + Shoto Install
  17. Great small setup. Good price also. How is the Luxpower compared to your Sunsynk inverter? Is it the LXP version?
  18.    Elroc reacted to a post in a topic: Sonoff Loadshedder Lucky Draw Bundle
  19.    zsde reacted to a post in a topic: Black Friday lithium batteries
  20.    Sc00bs reacted to a post in a topic: Black Friday lithium batteries
  21. This site is a scam site. Their offices do not exist. It is the same address as phase-energy.co.za which is a scam.
  22.    PhatWheZ reacted to a post in a topic: Sonoff Loadshedder Lucky Draw Bundle
  23. That restart SOC is quite high. I know it is the default value but on a 24kWh battery it can be much lower.
  24.    Energy-Jason reacted to a post in a topic: Sonoff Loadshedder Lucky Draw Bundle

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.