Jump to content

Peter V

Members
  • Posts

    106
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Peter V's Achievements

  1. Very similar setup capacity wise with similar consumption. Only time I use more is on very hot summer days when load shedding allows me to run a few aircon units (Aircons on non-essential circuits).
  2. My installer wired in a red led voltage indicator (shines red and shows battery voltage) which illuminates when load shedding. I think he used one of the auxiliary outputs on my Multiplus.
  3. I have the same battery (FW) so cares. At least I can sleep at night knowing it just keeps ticking along.
  4. Hi, I may not be interpreting your set up correctly. According to TP-Link guidelines, your Decos should be set up in Access point mode if you use a router. The router should sit between your fibre connection and the APs (Decos), whether wired or wireless. I understand your set up as internet Deco router iHost. This will cause DNS conflicts. Personally, I use my first Deco as the router and achieve full download speeds despite Afrihost stating this could slow down things. When you do get things going let us all know how it's working.
  5. I have Victron and happy with my choice. Sunsynk was in its infancy at the time. Retrospectively, I could have left R40K in my pocket had I gone Sunsynk.
  6. BTW, de-ionised water is expensive to produce requiring special equipment and is corrosive.
  7. Anyone in East London offering the service?
  8. Anyone out there using the iHost yet. Please share your current experience. The web does not provide much other than the initial reviews around March / April this year.
  9. Not sure whether relevant, but also have an old Conlog. My installer set the grid set point at 80W rather than the recommended 50W for Victron Multiplus because of the issue you describe.
  10. From the warrant I read, "Discharges deeper than 80% DoD and less than 80% DoD are also counted into to the total number of cycles on a pro rata basis." I interpret your example as being two by 50% cycles, i.e. one full cycle over two days. However, a discharge to 10% will be 90/80 cycles or 1,13. In my case, I set my on grid limit to 35% DOD and force charge back to 100% if I have inclement weather so theoretically my battery is only cycling around 300 times p.a. Do you concur?
  11. Your inverter has a self-consumption of around 2 kWh per day and your battery cycling is not 100% efficient. This will account for some of the increased power consumption you are seeing. Do other checks as suggested elsewhere in this post.
  12. Anyone running a heat pump in conjunction with solar water heating? Interest is academic at this stage as I probably use less than 150kWh of power pa (mostly from battery) to boost water temperature first thing in the morning. Even though I have PV, it still makes no financial sense despite the horrific power price increases of recent times. Similarly I do not believe there is an economic case for a heat pump other than a leaning towards the green brigade. If we have loadshedding, we have cold water on cold nights unless I remember to choose another timer on the smart geyser switch.
  13. A technology I understand and have implemented in many industrial applications over the years. It is not cheap to implement, membranes have a finite life and roughly speaking constitute around 80% of the initial installation cost. RO plants are also quite energy hungry.with high pressure pumps. The RO company was based in Stellenbosch and as I recall was started by a bunch of Stellenbosch Univerity whizz kids. I will differ with you on rights to water but agree on the total lack of competence or integrity in managing the resource these days.
×
×
  • Create New...