.

 

Bull-Datasheet-100Ah.pdf Bull-Datasheet-125Ah.pdf

Will these batteries work with my older Axpert and the Centurion solar setup I have, like the Pylontech batteries do?

Will this work with an existing battery? Can it be used for expansion of existing storage?

16 minutes ago, Dname said:

Will this work with an existing battery? Can it be used for expansion of existing storage?

It's never a good idea to mix different brands of batteries or different types of batteries.

Below are the Victron Approved batteries from https://www.victronenergy.com/live/battery_compatibility:start.  Bull is not listed.

5 minutes ago, Warwick Chapman said:

Below are the Victron Approved batteries from https://www.victronenergy.com/live/battery_compatibility:start.  Bull is not listed.

@Backbone Energy

 

1 hour ago, Shaunpot said:

Will these batteries work with my older Axpert and the Centurion solar setup I have, like the Pylontech batteries do?

Hi Shaun. They will work, but only on voltage settings and will not be comms enabled. We do have them out in installations with these types of inverters and can supply you with the correct settings for the inverter on request.

1 hour ago, Dname said:

Will this work with an existing battery? Can it be used for expansion of existing storage?

Hi Dname. You should never mix different batteries, especially not Lithiums. So in short the answer is no, if you are going to try upgrade an existing system, then please add the same batteries as you have installed or replace the batteries all together with new ones of the same make. Our 5.1kW and 6.4kW batteries can be mixed and matched between each other but that is because they have been designed specifically to do so.

1 hour ago, Warwick Chapman said:

Below are the Victron Approved batteries from https://www.victronenergy.com/live/battery_compatibility:start.  Bull is not listed.

 

1 hour ago, Warwick Chapman said:

Below are the Victron Approved batteries from https://www.victronenergy.com/live/battery_compatibility:start.  Bull is not listed.

 

1 hour ago, Warwick Chapman said:

Below are the Victron Approved batteries from https://www.victronenergy.com/live/battery_compatibility:start.  Bull is not listed.

Hi Warrick. Please see attached document from Victron regarding the BSL approval.

32 minutes ago, Backbone Energy said:

Hi Shaun. They will work, but only on voltage settings and will not be comms enabled. We do have them out in installations with these types of inverters and can supply you with the correct settings for the inverter on request.

Thank you, really appreciate it.

22 hours ago, Powerforum Store said:

.

 

Bull-Datasheet-100Ah.pdf 887.62 kB · 45 downloads Bull-Datasheet-125Ah.pdf 1.29 MB · 62 downloads

How can I order 2 of these

1 minute ago, Johanba said:

How can I order 2 of these

You can Contact us Via email [email protected] or you can phone us on 0742189845

Will this interface with the Growatt SPF 5000 ES?

40 minutes ago, tetrasection said:

Will this interface with the Growatt SPF 5000 ES?

Yes it will work.

On 2020/11/25 at 12:14 PM, Powerforum Store said:

.

 

Bull-Datasheet-100Ah.pdf 887.62 kB · 52 downloads Bull-Datasheet-125Ah.pdf 1.29 MB · 67 downloads

Guys Time is Running out on this Amazing Special !!!

On 2020/11/25 at 2:48 PM, Backbone Energy said:

Hi Warrick. Please see attached document from Victron regarding the BSL approval.

Congratulations on the approval of your battery.  I hope they list it soon.

 

Hi, does anyone have a user manual for these BSL batteries, bought two but there is nothing in the boxes or the website listed on the boxes?

Thank you in advance.

@Backbone Energy could you please assist. Thanks very much.

Jay

The BSLB manual is under development. We have collating information and settings from all major inverter OEM's and how the BSLB communicates. Has taken a bit of time but we are nearly there.

👍🏻 Thanks

Are these batteries still available ?

If so, Best Price ?

 

Hi, just want to know if anyone connected the a BSL Bull 6.4kw Battery or the 5kw to a mecer axpert 5kw mks inverter. 

My Mecer is currently connected to a victron bmv 700 with omnipower batteries. 

 

Please let me know if it will work as the inverter has a Rs232 communication port

@Backbone Energy

i have 2 6.4kwh batteries connected to a 5kw sunsynk inverter. 

What is the discharge rating that I should use (amps). 

My installer had it at 120A, but I reduced it to 90A based on the data sheets I have seen. 

Am i correct - see below

best practice would be charge @ 80ah 

max discharge is 210ah 

battery capacity 250ah 

this subject to parallel with communication into the Sunsynk and communication between each battery. 

question: have the dip switches been changed to accommodate second battery?