Hi Guys

I run four of the above units 2 each in parallel. I need to upgrade the firmware, currently on V 1.01

Anybody out there with a later firmware version?

Or a link to a download site?

Thanks

Chris-R

 

Hi Chris, sorry cannot help you but I am also looking for it as I have the Mecer version.

 

did you guys find anything?

HI , I also run one of these systems and also cannot find anything at all with regards the upgrade. My question is , is there an upgrade? I have asked Mecer who are the agents here in SA and don't get any replies at all with regards this and have also searched numerous websites including Australia.

I have found this website https://www.ostrovni-elektrarny.cz/index.php?page=podpora

where you will have to translate the page but there seems to be a lot with regards the Infini 10KW 3 phase as well as software.

On 2020/05/07 at 3:05 PM, Chris-R said:

Hi Guys

I run four of the above units 2 each in parallel. I need to upgrade the firmware, currently on V 1.01

Anybody out there with a later firmware version?

Or a link to a download site?

Thanks

Chris-R

 

 hi 

do you have soloution of 90 error in infini 10kw 

its about serial no error do you have file to add a serial no

On 2020/08/31 at 6:33 AM, Ali virk said:

 hi 

do you have soloution of 90 error in infini 10kw 

its about serial no error do you have file to add a serial no

my email ahmad.ali2893496@gmail .com

[email protected]

wh

 

On 2020/08/31 at 6:35 AM, Ali virk said:

my email ahmad.ali2893496@gmail .com

[email protected]

wh

 

Hi Ali virk ,

I have a problem with infini10kw, i update firmware for error 12 after that it goes on fault 19 when grid power on,  can you help me out in this matter.

Regards 

Habib Ahmed

On 2020/07/21 at 9:40 AM, Ross said:

I have found this website https://www.ostrovni-elektrarny.cz/index.php?page=podpora

where you will have to translate the page but there seems to be a lot with regards the Infini 10KW 3 phase as well as software.

Thanks for the link, a colleague shared it with me recently but seems somehow but now I can navigate the site well, I got some rar files on the site but requires password when I want to extract them. Please can you help with the password to use.. thank you

3 hours ago, Abbas Olatayo said:

Please can you help with the password to use..

I'm set up for extracting passwords from rar and other archive files, but I need a link to exactly the archive you intend to use.

On 2020/07/21 at 6:40 PM, Ross said:

I have found this website https://www.ostrovni-elektrarny.cz/index.php?page=podpora

Seems it's now https://www.ostrovni-elektrarny.cz/index.php?podpora .

I note that there are (a few, minimal) firmware release notes there! For Axpert King, VM III, Max and others, as well as Infini.

The password of fw files from the czech site is "daily".

But be warned: Not every FW for the 10k infini works on all models!!!

You have to choose the right one based on your serial# which includes the production date. I can assist.

To see correct version currently installed (compilation date/time) u have to press UP+DOWN simultaneously for a few sec.

On 2022/11/13 at 6:21 AM, riogrande75 said:

The password of fw files from the czech site is "daily".

But be warned: Not every FW for the 10k infini works on all models!!!

You have to choose the right one based on your serial# which includes the production date. I can assist.

To see correct version currently installed (compilation date/time) u have to press UP+DOWN simultaneously for a few sec.

Thank you. I will like to have your assistance on this. I will prefer the faster way of communication. Thanks

On 2022/11/12 at 11:54 AM, Coulomb said:

I'm set up for extracting passwords from rar and other archive files, but I need a link to exactly the archive you intend to use.

If you can help on the case, I'll be glad. I'm trying to upgrade a firmware or downgrade the latest version to a bit old version for parallel compatibility.

What inverter do you have exactly (pic of type/serial would be helpful) and what fw version does it run currently?

 

35 minutes ago, riogrande75 said:

What inverter do you have exactly (pic of type/serial would be helpful) and what fw version does it run currently?

 

10kW Infini solar inverter. The latest version I have is V6.02, I have another V1.01, so trying to upgrade V1.01 to be compatible with V6.02

Pls. note both of my post's above!

4 hours ago, Abbas Olatayo said:

trying to upgrade V1.01 to be compatible with V6.02

That seems like a wide gap to bridge.

I'm suspecting that one of them is a clone with who knows what firmware in there.

Pictures of the stickers on the side would be very helpful.

So far I did not see any firmware version other than 1.01 on Infinisolar 10k and it's clones (FSP,MPP,EASUN,PANTA,...). So this is absolutely meaningless.

As stated above, the firmware compilation date (U1/U2, press UP+DOWN) is the only important notice.

Also production date (can be extracted from serial#) is crucial - this tells the hw generation of the inverter (non parallel, parallel-A, parallel-B,...).

Edited November 16, 20223 yr by riogrande75

On 2022/11/16 at 2:11 PM, Coulomb said:

Pictures of the stickers on the side would be very helpful

I will post that soon. Though it shows that the new version was manufacture this year, it's very recent while other one is around 2019 or so. 

On 2022/11/16 at 6:39 PM, riogrande75 said:

So far I did not see any firmware version other than 1.01 on Infinisolar 10k and it's clones (FSP,MPP,EASUN,PANTA,...). So this is absolutely meaningless.

As stated above, the firmware compilation date (U1/U2, press UP+DOWN) is the only important notice.

Also production date (can be extracted from serial#) is crucial - this tells the hw generation of the inverter (non parallel, parallel-A, parallel-B,...).

this is new version
[email protected]

@Ali juttyou never stop learning...☺️

What fw version (date) does your device run and what type/brand is it (sticker on side)?

On 2022/11/13 at 5:21 AM, riogrande75 said:

The password of fw files from the czech site is "daily".

But be warned: Not every FW for the 10k infini works on all models!!!

You have to choose the right one based on your serial# which includes the production date. I can assist.

To see correct version currently installed (compilation date/time) u have to press UP+DOWN simultaneously for a few sec.

Afternoon,

I have been searching for this information for so many hours.

Now, thanks to you, at least I know why we have ERROR 71 (firmware incompatible) here.

But can they be updated to the same firmware? How can I tell?

Thanks for reading, Alex

 

 

Edited January 27, 20233 yr by user27

The fw you installed is for brand new devices (2022 and up). I expect that it fits only on the latest generation of cpu mainboards.
What serial# does your inverter have? Based on that I can suggest the latest firmware for your device.

Those are two different inverters; I haven't done any firmware updates I don't know how to and I don't have any firmware files.

The brighter green screen is a new addition since we need more power; I bought the same model to connect in parallel with the older one.

How do I find out serial numbers? In the menu somewhere?

Thanks again

Serial can be seen in SolarPower software and on the typeshield on the side of the inverter. It should start with 9616xxyyzz...